Dd wrt inadyn not updating

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

DDNS only doesn't work when using the linaro toolchain. -a xxx.Mon Jun 6 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.Sat May 14 2011: DNS lookup of 'XXXXX.dyndns.org' gives IP# '83xx.xx' Sat May 14 2011: Checking for IP# change, connecting to checkip.dyndns.org(2.70) Sat May 14 2011: No IP# change detected, still at 83Any word on this?Mine is failing as well, and attempting to run it from the command line just results in a segmentation fault.No matter how many times I reboot and pick up new ip addr's, I still get the note below. I then tried manually updating ddns from the website at Rebooted and still get the log below referencing '226.63'.

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "3&

DDNS only doesn't work when using the linaro toolchain. -a xxx.Mon Jun 6 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.Sat May 14 2011: DNS lookup of 'XXXXX.dyndns.org' gives IP# '83xx.xx' Sat May 14 2011: Checking for IP# change, connecting to checkip.dyndns.org(2.70) Sat May 14 2011: No IP# change detected, still at 83Any word on this?Mine is failing as well, and attempting to run it from the command line just results in a segmentation fault.No matter how many times I reboot and pick up new ip addr's, I still get the note below. I then tried manually updating ddns from the website at Rebooted and still get the log below referencing '226.63'.

[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "6[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "6[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "6[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "6[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "6[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "6[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "6[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "6[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "6[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]][[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.

STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

If it is left broken like this why don't just remove the function? Mon Jun 27 2011: INADYN: IP read from cache file is 'xxx.xxx'. Mon Jun 27 2011: I: INADYN: IP address for alias 'here' needs update to 'xxx.xx' Revision is r17201 from Eko BSpre SP2 builds. Mon Sep 5 2011: I: INADYN: IP address for alias 'xxxxxx.dyndns.org' needs update to 'xxx.xxx' Same issue on my Buffalo WHR-G300N.

Mon May 9 2011: INADYN: IP read from cache file is '71. [email protected]_DD-WRT:/# cat /tmp/ddns/Sat May 14 2011: Started 'Inadyn version 1.97.4' - dynamic DNS updater.

]]", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "4[[

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\324\21\0\0", 10) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 read(0, "\376\36\0\0", 11) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: I: INAD"..., 108) = 108 stat("/etc/resolv.conf", ) = 0 open("/etc/resolv.conf", O_RDONLY) = 2 ioctl(2, TIOCNXCL, 0x7fd79780) = -1 ENOTTY (Inappropriate ioctl for device) read(2, "nameserver 2.222\nnamese"..., 4096) = 72 read(2, "", 4096) = 0 close(2) = 0 uname() = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Mon May 9 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Edit: Found forced reinstall in fraters optware script: Package: uclibc-opt Version: 0.9.28-13 After installing optware on my E4200 on 16994 Big nv60 # Reinstalled 'Inadyn version 1.97.4' via ipkg ipkg install inadyn # Inadyn with defaul input_file gives error about cache.STILL broken as of r17201 What exactly is wrong here? I really wonder why someone with r16856, as mentioned above, would have a working DDNS, while most of us here have a broken one since r15xxx. It just show these lines on DD-WRT web interface and in ddns.log: Mon Jun 27 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Fri Aug 12 2011: INADYN: IP read from cache file is '80.1'. Fri Aug 12 2011: I: INADYN: IP address for alias 'wasserverband.dyndns.org' needs update to '80.1' Fri Aug 12 2011: W: INADYN: Error validating DYNDNS svr answer. (HTTP/1.1 502 Bad Gateway Date: Fri, GMT Server: Apache X-Update Code: R Content-Length: 6 Connection: close Content-Type: text/plain dnserrtitle Mon Sep 5 2011: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.

||

Sat Apr 30 2011: INADYN: IP read from cache file is '91xxx.55'. Sat Apr 30 2011: I: INADYN: IP address for alias 'xxx.dyndns.org' needs update to '78xxx.30' Sat Apr 30 2011: I: INADYN: Alias 'xxx.dyndns.org' to IP '78xxx.30' updated successfully. Mon May 9 2011: I: INADYN: IP address for alias '*.dyndns.org' needs update to '72. X.96' Buffalo WZR-HP-G300NH DD-WRT Build 16994 The fix is in one of the installed packages via optware But which one??

close(0) = 0 close(2) = 0 setsid() = 5349 chdir("/") = 0 umask(0) = 022 time([1305018811]) = 1305018811 open("/etc/TZ", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, "Tue May 10 2011: INADYN"..., 100) = 100 open("/tmp/ddns/inadyn_ip.cache", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigaction(SIGALRM, , NULL, 16) = 0 rt_sigaction(SIGHUP, , NULL, 16) = 0 rt_sigaction(SIGINT, , NULL, 16) = 0 rt_sigaction(SIGQUIT, , NULL, 16) = 0 open("/dev/nvram", O_RDWR) = 0 old_mmap(NULL, 61440, PROT_READ, MAP_SHARED, 0, 0) = 0x2abbc000 read(0, "\353&\0\0", 12) = 4 msync(0x2abbc000, 61440, MS_INVALIDATE) = 0 r